Aston Martin Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
Hi I just went to start my DB7 to conduct some a brake build. The car has been left a while with the battery disconnected and hence when i went to start it the flasher were blinking and normally i just insert the key and reset the immobiliser and it starts............

Today though when i inserted the key the car started but the key will not turn to switch of the engine and is locked in the ignition barrel.

Any advice on how to remove the key , reset the system would be appreciated.

Thanks
 

·
Registered
Joined
·
2 Posts
Discussion Starter · #2 ·
As an update. I managed to get the key out of the barrel and have reset the immobiliser by inserting the master key which never get used. The key is still very stiff and hence should i lubricate the barrel where the key is inserted with WD40 or with a light grease.

The car now lock and unlocks on the key fobs which is a great relief. thanks
 
1 - 2 of 2 Posts
Top