[Yeti Edwards]

Hello folks,
could someone please advise of the absolute correct procedure for resetting the electric seats in my Rapide - driver's seat now fully forward and won't go back, all other switch movements work though,
Many thanks in advance

 

[Yeti Edwards]

Hello folks,
could someone please advise of the absolute correct procedure for resetting the electric seats in my Rapide - driver's seat now fully forward and won't go back, all other switch movements work though,
Many thanks in advance

Eureka - AT LAST
After 3 days of trawling the net, I found the answer on from a chap on Piston Heads.
I've tried every procedure and position on every forum - even the Karma Sutra and a dude in England, only around 20 miles from me posted it around 18 months ago.
THIS IS THE ONLY RESET FOR RAPIDE THAT WORKED
1. Move the seat all the way forward
2. Move the top of the seat all the way back
3. Move the front of the seat all the way down
4. Move the rear of the seat all the way down
I was so happy, I leaked

 

[Jmkwalters5]

Rapide front seats

Good for you Yeti Edwards. I have oftentimes found what I need surfing the web. Sometimes it takes a while - but it's usually out there. Pistonheads is a really great site. As is RedPants LOL. Rich Seidlitz really knows his stuff. And sells a lot of products and accessories for any at-home work you'd like to do. That being said.... I am still looking for some advice on O2 sensors for my 2010 Vantage Roadster V8/Stick. Error code on dash says it's the upstream sensor - which with the help I got from redpants tells me that I can replace these myself. (I will admit that I grew up doing some work in my uncle's auto shop so I did get some decent mechanical eduacation - plus I really enjoy getting under the hood!) But I cannot discern if once I replace the sensors themselves will the computer reset so that I can have the car emissions tested or do I have to do that manually. Anyone know??? I have not received any reply on my previous post (March 24). Thank you!

 

[altawashm]

U can start by cleaning the O2 sensor and the drive on it.
Because sometimes the sensors are not fulty but there is something in the engine cuzing it to get bad reading "air or fuel".
After cleaning it if the error cleared and then came back after some drive. That mean the O2 is working good and the problem from somewhere else.

And plz dont drive the car without it. It will harm ur health and the environment.

 

[Jmkwalters5]

O2 sensors not working

U can start by cleaning the O2 sensor and the drive on it.
Because sometimes the sensors are not fulty but there is something in the engine cuzing it to get bad reading "air or fuel".
After cleaning it if the error cleared and then came back after some drive. That mean the O2 is working good and the problem from somewhere else.

And plz dont drive the car without it. It will harm ur health and the environment.

++++++++++

thank you altawashm! I will try that and see what happens. i don't even mind replacing them if i need to - as long as it fixes the problem. thanks again -