[CICYD]

I am a little bit annoyed that there's no wireless CarPlay on my car. Plugging in my iPhone with a cable is not hard but I rarely made time to do it on short drives.I recently found a simple adapter to make the CarPlay work wirelessly. There is no need to cut wires or harnesses or make any adaptations for its installation, it is Plug & Play.
This module will fit perfectly into your vehicle as if it was equipped with the original Carplay option. The installation of the device is done by simply plugging the connectors with those of your vehicle.
I thought my car model was not supported, but I asked customer service to know that my car can also be used.Worth recommending, after all it's just only $85.

Carlinkit 4.0 / Carlinkit 3.0 Wireless CarPlay Adapter for Wired CarPlay Cars Compatible with 98% Cars

Carlinkit 3.0/4.0 U2W Plus dongle is a wireless CarPlay/Android auto adapter that is suitable for 98% of existing wired CarPlay-enabled vehicles. If you use an iPhone and your vehicle supports wired CarPlay or these Aftermarket Head-Units (Alpine/ Pioneer/ Kenwood...), you can choose the...

carlinkitlife.com

 

[bondjamesbond]

what car did you put this in ? I have a 2010 vantage would it be compatible ? thanks

 

[khiroshima]

There are quite a few dongles the convert a wired connection to a wireless connection, they all seem to work pretty well. check out youTube, they have quite a few comparisons between brands, KH

 

[Amos]

what car did you put this in ? I have a 2010 vantage would it be compatible ? thanks

Your model may need to replace the main unit before using the carplay adapter.

 

[Ashman]

what car did you put this in ? I have a 2010 vantage would it be compatible ? thanks

Your 2010 is like my 2009. You basically need to replace the entire screen and back-end compute unit. I replaced my screen with a 6.5" touchscreen that connects to a Raspberry Pi 4 running Android. The audio output is connected to the AUX jack input for the stereo. Works awesome, but the job is not for the faint of heart. I'm an electrical engineer, so it wasn't difficult for me, but it'd probably be prohibitively difficult for many others.

I documented my journey in a series of videos. Part 1 is here: Q-Branch Pi

 

[mistakeum]

Your 2010 is like my 2009. You basically need to replace the entire screen and back-end compute unit. I replaced my screen with a 6.5" touchscreen that connects to a Raspberry Pi 4 running Android. The audio output is connected to the AUX jack input for the stereo. Works awesome, but the job is not for the faint of heart. I'm an electrical engineer, so it wasn't difficult for me, but it'd probably be prohibitively difficult for many others.

I documented my journey in a series of videos. Part 1 is here: Q-Branch Pi

 

[djv143]

I am a little bit annoyed that there's no wireless CarPlay on my car. Plugging in my iPhone with a cable is not hard but I rarely made time to do it on short drives.I recently found a simple adapter to make the CarPlay work wirelessly. There is no need to cut wires or harnesses or make any adaptations for its installation, it is Plug & Play.
This module will fit perfectly into your vehicle as if it was equipped with the original Carplay option. The installation of the device is done by simply plugging the connectors with those of your vehicle.
I thought my car model was not supported, but I asked customer service to know that my car can also be used.Worth recommending, after all it's just only $85.
View attachment 1996

Carlinkit 4.0 / Carlinkit 3.0 Wireless CarPlay Adapter for Wired CarPlay Cars Compatible with 98% Cars

Carlinkit 3.0/4.0 U2W Plus dongle is a wireless CarPlay/Android auto adapter that is suitable for 98% of existing wired CarPlay-enabled vehicles. If you use an iPhone and your vehicle supports wired CarPlay or these Aftermarket Head-Units (Alpine/ Pioneer/ Kenwood...), you can choose the...

carlinkitlife.com

Would this work on a 2019 DBS?

 

[djv143]

Would this work on a 2019 DBS?